Can’t find the package you’re looking for?
CALL 0333 0164775 or contact your local store
See this package in other speaker bundle packages
Can’t find the package you’re looking for?
CALL 0333 0164775 or contact your local store
See this package in other speaker bundle packages
Silver 200 7G | |
| System Format | 2.5-way |
| Frequency response (-6dB) In room | 34 Hz – 35 kHz |
| Sensitivity (2.83v @ 1m) | 87.5 dB |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 5.0 Ohms @ 240 Hz |
| Maximum SPL | 108 dBA (single) |
| Power Handling (RMS) | 150 W |
| Recommended Amplifier Requirements | 60 – 150 W |
| Bass Alignment | Bass reflex Dual HiVe II port system |
| Crossover Frequency | 2.7 kHz |
| Port Tuning Frequency | 49Hz |
| Drive Unit Complement | 2 x 51/4” C-CAM RST II mid-bass driver 1 x 1” (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II |
| External Dimensions including Grille and Terminals (H x W x D) | 885 x 165 x 272 mm |
| External Dimensions including Outrigger Feet and Spikes (H x W x D) | 930 x 254 x 329 mm |
| Weight (Each) | 13.7 kg |
| Finishes | High Gloss Black, Satin White, Natural Walnut, Ash, Black Oak |
Silver C250 7G | |
| System Format | 3-way |
| Frequency response (-6dB) In room | 65 Hz – 35 kHz |
| Sensitivity (2.83v @ 1m) | 88.5 dB |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 3.9 Ohms @ 170 Hz |
| Maximum SPL | 110 dBA (single) |
| Power Handling (RMS) | 200 W |
| Recommended Amplifier Requirements | 80 – 200 W |
| Bass Alignment | Sealed cabinet |
| Crossover Frequency | 650 Hz 3.3 kHz |
| Port Tuning Frequency | N/A |
| Drive Unit Complement | 2 x 51/4” C-CAM RST II bass driver 1 x 3” C-CAM RST II mid-range driver 1 x 1” (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II |
| External Dimensions including Grille and Terminals (H x W x D) | 206 x 481 x 272 mm |
| External Dimensions including Outrigger Feet and Spikes (H x W x D) | N/A |
| Weight (Each) | 10.6 kg |
| Finishes | High Gloss Black, Satin White, Natural Walnut, Ash, Black Oak |
Silver FX 7G | |
| System Format | 2-way |
| Frequency response (-6dB) In room | 81 Hz – 35 kHz |
| Sensitivity (2.83v @ 1m) | 87.5 dB |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 4.1 Ohms @ 240 Hz |
| Maximum SPL | 104 dBA (single) |
| Power Handling (RMS) | 85 W |
| Recommended Amplifier Requirements | 30 – 85 W |
| Bass Alignment | Sealed cabinet |
| Crossover Frequency | 2 kHz |
| Port Tuning Frequency | N/A |
| Drive Unit Complement | 1 x 6” C-CAM RST II mid-bass driver 2 x 1” (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II |
| External Dimensions including Grille and Terminals (H x W x D) | 250 x 312 x 147 mm |
| External Dimensions including Outrigger Feet and Spikes (H x W x D) | N/A |
| Weight (Each) | 4.5 kg |
| Finishes | High Gloss Black, Satin White |
Silver W12 | |
| Lower Frequency Limit | 20 Hz (Typical IEC room) |
| Amplifier Output | 500 W continuous |
| Phase Control | 0 & 180 degrees |
| Drive Unit Complement | 1 x 12″ C-CAM subwoofer driver featuring triple suspension and 3″ long throw voice coil |
| Dimensions (Including Grille, Amp and Feet) | 370 x 340 x 410 mm |
| Weight (unpacked) | 20.1 kg (44 lb 5 oz) |
| Upper Frequency Limit | 40 – 120 Hz variable |
| Amplifier Classification | Class-D amplifier with switched-mode power supply (SMPSU) |
| Auto Sensing | Line Level >2 mV |
| Trigger Input | 5 – 12 V via 3.5 mm mono mini-jack socket |
| Mains Input Voltage | 110 – 120 Vac / 220 – 240 Vac 50/60 Hz (Electronically Auto selected) |
| Low Pass Filter Alignment | Active 4th order 24 db/octave |
| Bass EQ Profiles | 1: Movie 2: Music 3: Impact |
| Input Level Requirements | Standby after 20 minutes if no signal sensed |
| Cabinet Dimensions (Excluding Grille and Terminals (H x W x D)) | 340 x 340 x 380 mm |
| Power Consumption | 400 W / 0.5 W in Standby (ErP approved) |
Silver AMS 7G | |
| System Format | 2-way |
| Frequency response (-6dB) In room | 76 Hz – 35 kHz |
| Sensitivity (2.83v @ 1m) | 87 dB |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 4.1 Ohms @ 230 Hz |
| Maximum SPL | 102 dBA (single) |
| Power Handling (RMS) | 60 W |
| Recommended Amplifier Requirements | 30 – 60 W |
| Bass Alignment | Sealed cabinet |
| Crossover Frequency | 2 kHz |
| Port Tuning Frequency | N/A |
| Drive Unit Complement | 1 x 51/4” C-CAM RST II mid-bass driver 1 x 1” (25 mm) C-CAM Gold Dome tweeter with optimised Waveguide |
| External Dimensions including Grille and Terminals (H x W x D) | 185 x 185 x 313 mm |
| External Dimensions including Outrigger Feet and Spikes (H x W x D) | N/A |
| Weight (Each) | 4 kg |
| Finishes | High Gloss Black, Satin White |










Reviews
There are no reviews yet.